Public Utility Design Standards

The following documents provide City staff, engineers, designers and developers guidelines to follow when designing public water and sewer line projects in the City of Longview.
  1. Blocking Detail
  2. Cleanout Install on Existing Sewer Service
  3. Detection Wire Installation
  4. Detector Check
  5. Drop Connection Gas Sealed and Standard
  6. Fire Hydrant Installation
  7. Open Cut Pavement Repair Asphalt
  8. Pavement Repair by Manhole
  9. Pipe Casing Under Roadway with Spacers
  10. Public Utility Design Standards Letter
  11. Sanitary Sewer Manhole
  12. Sanitary Sewer Service Deep Installation
  13. Trench Width and Earth Embedment
  14. Vertical Thrust Blocking at Pipe Bend with Notes
  15. Water Main Tap
  16. Water Service Installation